鋁渣處理機通過對熱態鋁渣進行攪拌來分離出液態鋁液，也就是首先對灰渣進行防氧化降溫，同時，再對灰渣進行一定程度的破碎處理，處理後的熱灰加入冷灰桶，對熱灰進行冷卻。利用除塵器進行集中除塵

2台炒灰機共用1套中顆粒冷灰加料系統，其中中顆粒來源全部來自於炒灰機1

2台炒灰機分別配備2台冷灰桶。2套系統可共用外部水循環系統和除塵系統，但是循環量需達到兩台設備需求量的總和

該套設備配備3道篩分系統，其中細灰裝袋後外售，大顆粒鋁含量高，可回爐重新熔化回收

叉車進料出料的位置（圖中標識叉車的位置）在布局時需考慮叉車的回轉空間，理論上需預留7m距離（以3噸叉車為準）

每套炒灰設備配備一套專門的遙控器，簡單方便，亦可在操控箱上手動操作

Through stirring the hot aluminum slag, aluminum liquid is separated by aluminum slag processor. The slag is firstly anti-oxidized and cooled, also, the ash slag is crushed to a certain level. The hot ash is added to the cooling bucket for cooling down. Lastly use dust collector to remove the dust.

Two ash frying machines share a set of medium particle cooling feeding system, the source of medium particles comes from machine 1.

Two ash frying machines are equipped with two cooling barrels respectively. The 2 sets of systems can share the external water circulation system and dust removal system, but the circulation volume needs to reach the sum of the demand of machines.

This set of equipment is equipped with 3 screening systems, the fine ash is bagged and sold, and the large particles have high aluminum content.

Each set of ash frying equipment is with a remote.